====== Quickstart guide ======

First you need to setup MazView to work with your machine.\\

===== Settings =====

  * On the [[wiki:en:mazview:StartTab|Start tab]], Press [[wiki:en:mazview:settings|Settings]] in the Machines section
==== The Communication Tab ====
  * Set the correct COM-port, [[wiki:en:mazview:BaudrateParameters|Baud-rate]] and Control so it matches your machine. Baud-rate 4800 is a typical default speed.

==== The Paths Tab ====
  * Set the path to your existing Mazak files (if any).

Press Save and Close

===== Communication =====

==== To send a mazatrol program from the Machine to the Computer do the following: ====
  * Select the folder where you want to store the program
  * Press [[wiki:en:mazview:ReceiveButton|Receive button]] on the [[wiki:en:mazview:starttab|Start tab]]
  * At the machine: Start the transmission and wait until it's done.
  * At the computer: Press Close
  * Enter optional comment and filename (the filename should be suggested)

==== To send a mazatrol program from the Computer to the Machine do the following: ====
  * Select the folder where the program you want to send is located.
  * Select the program in the filelist
  * Press the [[wiki:en:mazview:SendButton|Send button]] on the [[wiki:en:mazview:starttab|Start tab]]
  * At the machine: Enter the program-number and start the receive. Wait until the transmission is done
  * At the computer: Press Close

===== Preview of program =====
  * Select the folder where the program you want to view is located.
  * Select the program in the filelist
  * Press the [[wiki:en:mazview:PreviewButton|Preview button]] on the Start tab
  * A preview window will appear with the program in it.
{{:wiki:en:mazview:previewwindow.png?nolink|}}