MicroTech StellaData AB

This is an old revision of the document!

---

Post-Processor for 4-axis milling for Radiel and Axiel milling.

Radial:

Check the Radial pdf for description of the approach.

Download post processor. Fanuc_Radial.fgf

Axial:

To get correct texts in Axial milling, you need a machine that manages polar interpolation. You can mill texts without polar interpolation, but the characters will not be 100% correct. It will be more incorrect when milling near the center of the workpiece.

Check the Axial pdf for description of the approach.

Download post processor. Fanuc_Axial.fgf