User Tools

Site Tools


wiki:en:mazview:quickstart

Quickstart guide

First you need to setup MazView to work with your machine.

Settings

The Communication Tab

  • Set the correct COM-port, Baud-rate and Control so it matches your machine. Baud-rate 4800 is a typical default speed.

The Paths Tab

  • Set the path to your existing Mazak files (if any).

Press Save and Close

Communication

To send a mazatrol program from the Machine to the Computer do the following:

  • Select the folder where you want to store the program
  • At the machine: Start the transmission and wait until it's done.
  • At the computer: Press Close
  • Enter optional comment and filename (the filename should be suggested)

To send a mazatrol program from the Computer to the Machine do the following:

  • Select the folder where the program you want to send is located.
  • Select the program in the filelist
  • Press the Send button on the Start tab
  • At the machine: Enter the program-number and start the receive. Wait until the transmission is done
  • At the computer: Press Close

Preview of program

  • Select the folder where the program you want to view is located.
  • Select the program in the filelist
  • Press the Preview button on the Start tab
  • A preview window will appear with the program in it.

wiki/en/mazview/quickstart.txt · Last modified: 2018/02/07 19:24 (external edit)