wiki:en:mazview:quickstart

This is an old revision of the document!

Table of Contents

Quickstart guide
- The Communication Tab
- The Paths Tab

Quickstart guide

First you need to setup MazView to work with your machine.

On the Start tab, Press Settings in the Machines section

The Communication Tab

Set the correct COM-port, Baud-rate and Control so it matches your machine. Baud-rate 4800 is a typical default speed.

The Paths Tab

Set the path to your existing Mazak files (if any).

Press Save and Close

wiki/en/mazview/quickstart.1395065528.txt.gz · Last modified: 2018/02/07 19:23 (external edit)