User Tools

Site Tools


wiki:en:mazview:quickstart

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
wiki:en:mazview:quickstart [2014/03/17 15:12]
admin created
wiki:en:mazview:quickstart [2018/02/07 19:24] (current)
Line 2: Line 2:
  
 First you need to setup MazView to work with your machine.\\ First you need to setup MazView to work with your machine.\\
-  * On the [[wiki:​en:​mazview:​StartTab|Start tab]], Press [[wiki:​en:​mazview:​CNCSettings|Settings]] in the Machines section 
-===== The Communication Tab ===== 
-  * Set the correct COM-port, Baud-rate and Control so it matches your machine. Baud-rate 4800 is a typical default speed. 
  
-===== The Paths Tab =====+===== Settings ===== 
 + 
 +  * On the [[wiki:​en:​mazview:​StartTab|Start tab]], Press [[wiki:​en:​mazview:​settings|Settings]] in the Machines section 
 +==== The Communication ​Tab ==== 
 +  * Set the correct COM-port, [[wiki:​en:​mazview:​BaudrateParameters|Baud-rate]] and Control so it matches your machine. Baud-rate 4800 is a typical default speed. 
 + 
 +==== The Paths Tab ====
   * Set the path to your existing Mazak files (if any).   * Set the path to your existing Mazak files (if any).
  
 Press Save and Close Press Save and Close
 +
 +===== Communication =====
 +
 +==== To send a mazatrol program from the Machine to the Computer do the following: ====
 +  * Select the folder where you want to store the program
 +  * Press [[wiki:​en:​mazview:​ReceiveButton|Receive button]] on the [[wiki:​en:​mazview:​starttab|Start tab]]
 +  * At the machine: Start the transmission and wait until it's done.
 +  * At the computer: Press Close
 +  * Enter optional comment and filename (the filename should be suggested)
 +
 +==== To send a mazatrol program from the Computer to the Machine do the following: ====
 +  * Select the folder where the program you want to send is located.
 +  * Select the program in the filelist
 +  * Press the [[wiki:​en:​mazview:​SendButton|Send button]] on the [[wiki:​en:​mazview:​starttab|Start tab]]
 +  * At the machine: Enter the program-number and start the receive. Wait until the transmission is done
 +  * At the computer: Press Close
 +
 +===== Preview of program =====
 +  * Select the folder where the program you want to view is located.
 +  * Select the program in the filelist
 +  * Press the [[wiki:​en:​mazview:​PreviewButton|Preview button]] on the Start tab
 +  * A preview window will appear with the program in it.
 +{{:​wiki:​en:​mazview:​previewwindow.png?​nolink|}}
wiki/en/mazview/quickstart.1395065528.txt.gz · Last modified: 2018/02/07 19:23 (external edit)